Junior Paraffin Greenhouse Heater
Suitable for a sectioned area of a greenhouse or large cold-frame the Junior Greenhouse Heater has a 0.1kw output and 2.25 litre capacity. Requires ventilation due to a possible build up of condensation and soot. If you want to start sowing your seeds in early Spring, it is important that you keep your greenhouse frost free. Similarly, if you wish to extend the season into Autumn and overwinter any plants, heaters can help with this. Our Price for the Junior Paraffin Greenhouse Heater Includes VAT Plus FREE Delivery to UK Mainland
£36.00
Senior Paraffin Greenhouse Heater
Providing heat coverage for a 4m² greenhouse, the Senior Paraffin Greenhouse Heater is a quality model providing many years of use. Safety tested and approved this greenhouse heater has a 0.3kw output and 4.5 litre capacity. Requires ventilation due to a possible build up of condensation and soot. If you want to start sowing your seeds in early Spring, it is important that you keep your greenhouse frost free. Similarly, if you wish to extend the season into Autumn and overwinter any plants, heaters can help with this. Our Price for the Senior Paraffin Greenhouse Heater Includes VAT Plus FREE Delivery to UK Mainland
£52.00
Maxi Paraffin Greenhouse Heater
Providing heat coverage for a 5m² greenhouse, the Maxi Paraffin Greenhouse Heater is a quality model providing many years of use. Providing anti-frost protection in larger structures this greenhouse heater has a 0.6kw output and 4.5 litre capacity. Requires ventilation due to a possible build up of condensation and soot. If you want to start sowing your seeds in early Spring, it is important that you keep your greenhouse frost free. Similarly, if you wish to extend the season into Autumn and overwinter any plants, heaters can help with this. Our Price for the Maxi Paraffin Greenhouse Heater Includes VAT Plus FREE Delivery to UK Mainland
£60.00
FirTree 0.3kW Little Gem Greenhouse Heater
The Hotbox Little Gem heater has an output of 0.3kW and will give frost protection in small areas such as cold frames and mini greenhouses and to curtained off areas of larger greenhouses. Available from the options section below is a propane regulator, a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output: 0.3KW Heating up to 20sq. ft Frost Protection up to 60 sq. ft Dimensions (HeightxDiameter): 265x160mm Made in UK CE Approved 1 Year Warranty Our Price for the Hotbox Litle Gem heater Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£89.00
Hobby Heatwave Propagation Panel 115x40cm
This electric propagation panel generates heat from underneath, encouraging rapid and strong growth of both seeds and cuttings, germination and rooting. The heating element is laminated between sheets of aluminium foil, spreading the heat evenly, giving excellent seed germination and a high strike rate for the propagation of cuttings. The entire foil panel is connected to Earth, offering complete safety, meeting all European Standards. The heating elements are coated in PTFE, ensuring both safety and durability. Used throughout the world by professional growers, the panel can be supplied with a thermostat. Wired in at the factory, including a 13A plug and 1.5m lead, the thermostat is sealed to operate in humid and damp conditions and temperature can be set between 6-38°C. The thermostat bulb should be inserted into the soil to measure the temperature accurately. Ideally, temperature should be reduced by about 5°C until the plant reaches the stage for planting out. Plants should be grown cold for the last 2-3 weeks to harden them off. Simple to install, the Hobby Heatwave should be laid on a 2 inch thick polystyrene panel on a bench, then covered with polythene to protect for longer life. Available from the options section below, polystyrene panels measure 60x40cm. If selected, this model will be supplied with two panels. The polythene sheets are cut to size. 115x40cm (3ft 9inch x 1ft 4inch) Propagation Panel PTFE Coated Heating Elements Even Distribution: No Cold or Hot Spots Optional Thermostat Our Price for the Hobby Heatwave Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£99.00
Hotbox Frost Eater 1kW Greenhouse Heater
The Frost Eater 1000 greenhouse heater is thermostatically controlled and will cut in when required to protect your plants against frost damage. Designed for use in cold frames, lean-to and smaller greenhouses it can be floor or wall mounted. For safety the heating element is sheathed and all electrical connections are protected inside the enclosure at the end of the heater. Heat Output 1000 Watts Voltage 220/240v/ AC50hz Dimensions (LxD) 540x120mm Frost Protection up to 80 sq. ft Supplied with Cable & Plug{/li] Our Price for the Frost Eater 1000 Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£99.99
Eden Greenhouse Heater 2kw
The new Lifestyle Eden 2kW Greenhouse Heater is a thermostatically controlled greenhouse heater manufactured in Europe to the highest standards, this heater is designed for maximum performance and reliability and is suitable for the discerning home gardener Essential for protecting young plants during spring and winter this greenhouse heater has a green enamel finish steel body and features ODS (Oxygen Depletion System), long lasting blue flame burners, a thermostat, piezo ignition and a safety valve, it is supplied with a hose and a regulator. All you need to do is select the required temperature, and let it warm up the greenhouse. Maximum Heat Output: 2 KW Thermostatic Control 7°C - 32°C Temperature Range Piezo Ignition Flame Failure Device Green Enamel Finish Steel Body CE Approved Hose and Regulator Supplied Dimensions:H485xW300xD130mm Weight 4kg Our Price for the Eden 2kW Greenhouse Heater Includes VAT Plus Free Next Working Day Delivery to UK Mainland if Ordered Before Noon (Excluding Remote Postcodes)
£105.00
Tropic Electric Greenhouse Heater
Providing heat coverage for a 14m² greenhouse, the Tropic Electric Greenhouse Heater has an electronically controlled thermostat and is the best way to heat a greenhouse. Creating a dry heat which circulates throughout the greenhouse reducing the risk of mould and mildew it has a 1kw to 2kw output. If you want to start sowing your seeds in early Spring, it is important that you keep your greenhouse frost free. Similarly, if you wish to extend the season into Autumn and overwinter any plants, heaters can help with this. Our Price for the Tropic Electric Greenhouse Heater Includes VAT
£110.00
Hotbox Shilton 2.2kW Electric Heater
The Shilton 2.2kW electric greenhouse heater is thermostatically controlled and will provide frost protection for an area of up to 180sq ft and heating for an area of up to 120sq ft. This free standing cabinet heater is by Shilton Heaters a household name in gardening who has been manufacturing greenhouse heaters for over 25 years. Heat Output 2.2kW Voltage 230v 13A Plug Thermostatic Control Frost Protection up to 180 sq. ft Heating up to 120 sq. ft Strong Industrial Powder Coated Grade Sheet Metal Case Dimensions (WxDxH): 36x16 x54cm (14x6x21 Inches) Our Price for the Shilton 2.2kW electric greenhouse heater Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£120.00
Hobby Heatwave Propagation Panel 200x60cm
This electric propagation panel generates heat from underneath, encouraging rapid and strong growth of both seeds and cuttings, germination and rooting. The heating element is laminated between sheets of aluminium foil, spreading the heat evenly, giving excellent seed germination and a high strike rate for the propagation of cuttings. The entire foil panel is connected to Earth, offering complete safety, meeting all European Standards. The heating elements are coated in PTFE, ensuring both safety and durability. Used throughout the world by professional growers, the panel can be supplied with a thermostat. Wired in at the factory, including a 13A plug and 1.5m lead, the thermostat is sealed to operate in humid and damp conditions and temperature can be set between 6-38°C. The thermostat bulb should be inserted into the soil to measure the temperature accurately. Ideally, temperature should be reduced by about 5°C until the plant reaches the stage for planting out. Plants should be grown cold for the last 2-3 weeks to harden them off. Simple to install, the Hobby Heatwave should be laid on a 2 inch thick polystyrene panel on a bench, then covered with polythene to protect for longer life. Available from the options section below, polystyrene panels measure 60x40cm. If selected, this model will be supplied with five panels. The polythene sheets are cut to size. 200x60cm (6ft 6inch x 2ft) Propagation Panel PTFE Coated Heating Elements Even Distribution: No Cold or Hot Spots Optional Thermostat Our Price for the Hobby Heatwave Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£120.00
Hobby Heatwave Propagation Panel 150x80cm
This electric propagation panel generates heat from underneath, encouraging rapid and strong growth of both seeds and cuttings, germination and rooting. The heating element is laminated between sheets of aluminium foil, spreading the heat evenly, giving excellent seed germination and a high strike rate for the propagation of cuttings. The entire foil panel is connected to Earth, offering complete safety, meeting all European Standards. The heating elements are coated in PTFE, ensuring both safety and durability. Used throughout the world by professional growers, the panel can be supplied with a thermostat. Wired in at the factory, including a 13A plug and 1.5m lead, the thermostat is sealed to operate in humid and damp conditions and temperature can be set between 6-38°C. The thermostat bulb should be inserted into the soil to measure the temperature accurately. Ideally, temperature should be reduced by about 5°C until the plant reaches the stage for planting out. Plants should be grown cold for the last 2-3 weeks to harden them off. Simple to install, the Hobby Heatwave should be laid on a 2 inch thick polystyrene panel on a bench, then covered with polythene to protect for longer life. Available from the options section below, polystyrene panels measure 60x40cm. If selected, this model will be supplied with five panels. Two polythene sheets each measuring 1600x600mm can be supplied, overlapping for full coverage. 150x80cm (4ft 11inch x 2ft 7inch) Propagation Panel PTFE Coated Heating Elements Even Distribution: No Cold or Hot Spots Optional Thermostat Our Price for the Hobby Heatwave Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£120.00
Eden Pro Greenhouse Heater 4.2kw
The new Lifestyle Eden Pro 4.2kW Greenhouse Heater is a thermostatically controlled greenhouse heater manufactured in Europe to the highest standards, this new convection heater is designed for maximum performance and reliability and is suitable for the commercial market as well as the discerning home gardener Essential for protecting young plants during spring and winter this greenhouse heater has a silver enamel finish steel body and features ODS (Oxygen Depletion System), long lasting blue flame burners, a thermostat, piezo ignition and a safety valve, it is supplied with a hose and a regulator. All you need to do is select the required temperature, and let it warm up the greenhouse. Maximum Heat Output: 4.2 KW Thermostatic Control 7°C - 32°C Temperature Range Piezo Ignition Flame Failure Device Green Enamel Finish Steel Body CE Approved Hose and Regulator Supplied Dimensions (LxWxH): 485x300x130mm Weight 4kg Our Price for the Eden 4.2kW Greenhouse Heater Includes VAT Plus Free Next Working Day Delivery to UK Mainland if Ordered Before Noon (Excluding Remote Postcodes)
£145.00
FirTree Proheater Popular 1.5kW Greenhouse Heater
The Proheater Popular 1500 LPG greenhouse heater with a 1.5KW output will heat an area of up to 55 sq ft and provide frost protection for an area of up to 110sq ft. The Proheater Popular1500 is a floor standing convector model that uses bottled propane gas. It features thermostatic control, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition. Available from the options section below is a propane regulator and a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 1.5kW at 37mbar Heating up to 55 sq. ft Frost Protection up to 110 sq. ft Thermostatic Control Piezo Ignition Flame Failure Device CO2 Sensor Device Floor Standing Dimensions (WxDxH): 310x 130x450mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£149.00
FirTree Proheater Deluxe 1.5kW Greenhouse Heater
The Proheater Deluxe 1500 is available for LPG or Natural Gas and with a 1.5kW output will heat an area of up to 55 sq ft and provide frost protection for an area of up to110sq ft. This Deluxe Proheater is a tried and tested design. Introduced in 1979 it features a virtually indestructible thermostatically controlled valve, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 1.5KW at 37mbar Heating up to 55 sq ft Frost Protection up to 110 sq ft Thermostatic Control Piezo Ignition Flame Failure Device CO2 Sensor Device Floor Standing Dimensions (WxDxH): 310x130x450mm Made in UK CE Approved 1 Year Earranty LPG or Natural Gas Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£175.00
Hotbox Levant Plus 1.8kW Fan Heater
The Levant Plus electric fan heater will improve circulation, control the temperature and protect against frost and cold weather. It has an output of 1.8kW linked to a thermostatic control which cuts the heat supply and allows the fan to continue to circulate the air, preventing airborne fungal disease. The Levant Plus from Hotbox is a purpose designed greenhouse heater for smaller sized growers developed from the professional growing market. The 3-position switch enables it to be used as a fan only in the summer months. The main body is constructed from stainless steel for maximum durability with a sealed motor for continuous running and it is supplied complete with chains and 'S' hooks for hanging from the greenhouse ridge. Air Movement 400 cbm/hr (250cfm) Voltage 220/240v/ AC50hz Current: Fan 0.3 amps, Fan & Heater 7.8 Amps Dimensions (LxD): 10x8.5inch (250x220mm) Frost Protection up to 120 sq. ft Heating up to 60 sq. ft Supplied with Chain, 'S' Hooks, 2 Metre Cable & Plug Our Price for the Levant Plus Fan Heater Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£179.99
FirTree Proheater Popular 3kW Greenhouse Heater
The Proheater Popular 3000 LPG greenhouse heater with a 3KW output will heat an area of up to 120 sq ft and provide frost protection for an area of up to 260sq ft. The Proheater Popular 3000 is a floor standing convector model that uses bottled propane gas. It features thermostatic control, an adjustable heater output, flame failure device, CO2 sensor and Piezo ignition. Available from the options section below is a propane regulator and a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 3kW at 37mbar Heating up to 120sq ft Frost Protection up to 260 sq ft Thermostatic Control Piezo Ignition Flame Failure Device CO2 Sensor Device Floor Standing Dimensions (WxDxH): 430x 150x450mm Made in UK CE Approved 1 Year Warranty Our Price for the Proheater Popular 3000 Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£185.00
Hotbox Regal Silver 4kW Greenhouse Heater
The Regal Silver 4kW greenhouse heater with non-electronic thermostat is available as an LPG or Natural Gas model and will heat an area of up to 140 sq ft and provide frost protection for an area of up to 350sq ft. The Regal is manufactured in long lasting aluminium coated steel, with a stainless steel burner, affords the gardener the simplicity and reliability he expects and provides a generous heat output of 4kW for almost any size of amateur greenhouse. Regal Silver has a non-electric thermostat which turns the heater down to just a small pilot flame when desired temperature is achieved. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 4kW Heating up to 140 sq ft Frost Protection up to 350 sq ft Thermostatic Control Piezo Push Button Ignition Flame Failure Device Floor Standing Dimensions (WxDxH): 360x170x540mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£199.00
Hotbox Sahara Silver 2.5kW Greenhouse Heater
The Sahara Silver 2.5kW Greenhouse heater with non-electronic thermostat is available as a LPG or Natural Gas model and will heat an area of up to 100 sq ft and provide frost protection for an area of up to 160 sq ft. The Sahara is manufactured in long lasting aluminium coated steel, with a stainless steel burner and affords the gardener the simplicity and reliability he expects. Sahara Silver has a non-electric thermostat which turns the heater down to just a small pilot flame when desired temperature is achieved. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 2.5KW Heating up to 100 sq ft Frost Protection up to 160 sq ft Thermostatic Control Piezo Push Button Ignition Flame Failure Device Floor Standing Dimensions (WxDxH): 360x160x540mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£199.99
Hotbox Shilton 3kW Greenhouse Heater
The Shilton 3kW Greenhouse heater is available as an LPG or Natural Gas heater and will heat an area of up to 120 sq ft and provide frost protection for an area of up to 220 sq ft. The Shilton is a popular heater that has been trusted by gardeners for decades. This floor standing convector model has long lasting aluminium enclosed steel body powder coated in a smart red finish. It features thermostatic control, adjustable heater output, flame failure device and Piezo ignition. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 3kW Heating up to 120 sq ft Frost Protection up to 220 sq ft Thermostatic Control Piezo Push Button Ignition Flame Failure Device Floor Standing Dimensions (WxDxH): 360x170x540mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£205.00
Hotbox Sahara Gold 2.5kW Greenhouse Heater
The Sahara Gold 2.5kW Greenhouse heater with electronic thermostat is available as a LPG or Natural Gas model and will heat an area of up to 100 sq ft and provide frost protection for an area of up to 160 sq ft. The Sahara is manufactured in long lasting aluminium coated steel, with a stainless steel burner and affords the gardener the simplicity and reliability he expects. Sahara Gold has an electrically operated solenoid valve which is operated by an electric thermostat for greater accuracy and maximum fuel economy. It needs an electrical supply and is made to order within approximately 14 working days. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 2.5KW Heating up to 100 sq ft Frost Protection up to 160 sq ft Thermostatic Control Piezo Push Button Ignition Flame Failure Device Floor Standing Dimensions (WxDxH): 360x160x540mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£215.00
Hotbox CO2 Growth Gas Generator 2.5kW
The made to order CO2 Growth Gas Generator 2.5kW burns LPG or Natural Gas, providing ideal growing conditions by controlling CO2 emissions. Controlled by an electrical solenoid valve which can be operated by a time switch set to run a few minutes each hour, the Growth Gas Generator provides the correct levels of CO2. Known as the 'Threefold Enrichment' process, it is widely used by professional gardeners during the hours of daylight to speed up photosynthesis, enhancing plant development. Depending on the size of your greenhouse the Growth Gas Generator should burn on and off for about twelve minutes in each hour, burning roughly 0.25kg of propane in twelve hours. This should increase the amount of carbon dioxide in the air to 1000 parts per million, up from the 300ppm we breathe in as air. With an output of 2.5kW the Growth Gas Generator will heat an area of up to 100sq ft and provide frost protection for an area up to 160sq ft. The Growth Gas Generator is supplied with a fused 13amp plug. Not included is an electronic timer which is required to control the amount of time the appliance is switched on and off, available from the options section. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. As this model is made to order please allow approximately 14 working days for delivery. Dimensions (HxWxD): 540x360x160mm Heat Output: 2.5kW Heating up to: 100sq ft Frost Protection up to: 160sq ft Weight: 7.5kg LPG or Natural Gas Our Price Includes VAT Plus Free Delivery to UK Mainland within 14 Working Days
£219.00
FirTree Proheater Popular 6kW Greenhouse Heater
The Proheater Popular 6000 LPG greenhouse heater with a 6KW output will heat an area of up to 200 sq ft and provide frost protection for an area of up to 500sq ft. The Proheater Popular 6000 is a floor standing convector model that uses bottled propane gas. It features thermostatic control, an adjustable heater output, flame failure device, CO2 sensor and Piezo ignition. Available from the options section below is a propane regulator and a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output: 6KW at 37mbar Heating up to 200sq. ft Frost Protection up to 500 sq. ft Thermostatic Control Piezo Ignition Flame Failure Device CO2 Sensor Device Floor Standing Dimensions: 510x160x560mm Made in UK CE Approved 1 Year Warranty Our Price for the Proheater Popular 6000 Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£225.00
Hotbox CO2 Growth Gas Generator 4kW
The made to order CO2 Growth Gas Generator 4kW burns LPG or Natural Gas, providing ideal growing conditions by controlling CO2 emissions. Controlled by an electrical solenoid valve which can be operated by a time switch set to run a few minutes each hour, the Growth Gas Generator provides the correct levels of CO2. Known as the 'Threefold Enrichment' process, it is widely used by professional gardeners during the hours of daylight to speed up photosynthesis, enhancing plant development. Depending on the size of your greenhouse the Growth Gas Generator should burn for about twelve minutes in each hour, burning about 0.25kg of propane in twelve hours. This should increase the amount of carbon dioxide in the air to 1000 parts per million, up from the 300ppm we breathe in as air. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. With an output of 2.5kW the Growth Gas Generator will heat an area of up to 140sq ft and provide frost protection for an area up to 350sq ft. The Growth Gas Generator is supplied with a fused 13amp plug. Not included is an electronic timer which is required to control the amount of time the appliance is switched on and off, available from the options section. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. As this model is made to order please allow approximately 14 working days for delivery. Dimensions (HxWxD): 540x360x160mm Heat Output: 4kW Heating up to: 140sq ft Frost Protection up to: 350sq ft Weight: 7.5kg LPG or Natural Gas Our Price Includes VAT Plus Free Delivery to UK Mainland within 14 Working Days
£235.00
Hotbox Shilton 6kW Greenhouse Heater
The Shilton 6kW Greenhouse heater is available as an LPG or Natural Gas heater and will heat an area of up to 350 sq ft and provide frost protection for an area of up to 500 sq ft. The Shilton is a popular heater that has been trusted by gardeners for decades. This floor standing convector model has long lasting aluminium enclosed steel body powder coated in a smart red finish. It features thermostatic control, adjustable heater output, flame failure device and Piezo ignition. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 6kW Heating up to 350 sq ft Frost Protection up to 500 sq ft Thermostatic Control Piezo Push Button Ignition Flame Failure Device Durable Powder Coating Floor Standing Dimensions (WxDxH): 510x160x560mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£240.00
Hotbox Regal Gold 4kW Greenhouse Heater
The Hotbox Regal Gold 4kW greenhouse heater with electronic thermostat is available as an LPG or Natural Gas model, and will heat an area of up to 140 sq ft and provide frost protection for an area of up to 350sq ft. The Regal is manufactured in long lasting aluminium coated steel, with a stainless steel burner, affords the gardener the simplicity and reliability he expects and provides a generous heat output of 4kW for almost any size of amateur greenhouse. Regal Gold is operated by an electrical thermostat and an electrical solenoid valve which reduces output to just a small pilot flame as soon as the thermostat is satisfied. The electrical thermostat gives greater accuracy and consequently better control over fuel consumption. It needs an electrical supply and is made to order within approximately 14 working days. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Heat Output 4kW Heating up to 140 sq ft Frost Protection up to 350 sq ft Thermostatic Control Piezo Push Button Ignition Flame Failure Device Floor Standing Dimensions (WxDxH): 360x170x540mm Made in UK CE Approved 1 Year Warranty Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£249.00
FirTree Proheater Deluxe Silver 12kW Greenhouse Heater
The Proheater Deluxe Silver 1200 with mechanical thermostat is the latest and largest greenhouse heater, burning LPG or Natural Gas. With a 12kW output the Deluxe 1200 will heat an area of up to 480sq ft and provide frost protection for an area of up to 1000sq ft. Introduced in 1979, this tried and tested design features a virtually indestructible thermostatically controlled valve, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition. The Silver model has a non-electric thermostat which turns the heater down to just a small pilot flame when desired temperature is achieved. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Dimensions (HxWxD): 535x630x170mm Heat Output 12kW at 37mbar Heating up to 480sq ft Frost protection up to 1000sq ft Thermostatic Control Piezo Ignition Flame Failure Device CO2 Sensor Device Floor Standing Made in UK CE Approved 1 Year Warranty LPG or Natural Gas Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
(2 reviews)
£355.00
Hotbox CO2 Growth Gas Generator 12kW
The made to order CO2 Growth Gas Generator 12kW burns LPG or Natural Gas, providing ideal growing conditions by controlling CO2 emissions. Controlled by an electrical solenoid valve which can be operated by a time switch set to run a few minutes each hour, the Growth Gas Generator provides the correct levels of CO2. Known as the 'Threefold Enrichment' process, it is widely used by professional gardeners during the hours of daylight to speed up photosynthesis, enhancing plant development. Depending on the size of your greenhouse the Growth Gas Generator should burn on and off for about twelve minutes in each hour, burning roughly 0.25kg of propane in twelve hours. This should increase the amount of carbon dioxide in the air to 1000 parts per million, up from the 300ppm we breathe in as air. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. With an output of 2.5kW the Growth Gas Generator will heat an area of up to 500sq ft and provide frost protection for an area up to 1000sq ft. The Growth Gas Generator is supplied with a fused 13amp plug. Not included is an electronic timer which is required to control the amount of time the appliance is switched on and off, available from the options section. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. As this model is made to order please allow approximately 14 working days for delivery. Dimensions (HxWxD): 540x360x160mm Heat Output: 12kW Heating up to: 500sq ft Frost Protection up to: 1000sq ft Weight: 7.5kg LPG or Natural Gas Our Price Includes VAT Plus Free Delivery to UK Mainland within 14 Working Days
£395.00
FirTree Proheater Deluxe Gold 12kW Greenhouse Heater
The Proheater Deluxe Gold 1200 with electrical thermostat is the latest and largest greenhouse heater, burning LPG or Natural Gas. With a 12kW output the Deluxe 1200 will heat an area of up to 480sq ft and provide frost protection for an area of up to 1000sq ft. Introduced in 1979, this tried and tested design features a virtually indestructible thermostatically controlled valve, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition. The Gold model is operated by an electrical thermostat and an electrical solenoid valve which reduces output to just a small pilot flame as soon as the thermostat is satisfied. The electrical thermostat gives greater accuracy and consequently better control over fuel consumption. It needs an electrical supply and is made to order within approximately 14 working days. Natural gas models should only be installed by a Corgi registered gas fitter and propane models require a regulator, available from the options section below. Also available is a B.S high pressure hose with two jubilee clips, supplied in 1 metre lengths; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions). For natural gas models a connection kit is available, screwing into the back of the heater with bayonet connector at other end. Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation. Dimensions (HxWxD): 535x630x170mm Heat Output 12kW at 37mbar Heating up to 480sq ft Frost protection up to 1000sq ft Thermostatic Control Piezo Ignition Flame Failure Device CO2 Sensor Device Floor Standing Made in UK CE Approved 1 Year Warranty LPG or Natural Gas Our Price Includes VAT Plus Free Delivery to UK Mainland within 7 Working Days
£399.99