The Classic Gold is supplied with one 90º bend and two straight lengths of vertical flue each 21" long, allowing the flue gases to be exhausted to the outside giving a clean atmosphere in the greenhouse.

With an output of 5.6kW (4.7kW when flued) the Classic Gold will heat an area up to 180sq ft and provide frost protection for an area up to 450sq ft.

Perfect for situations where the environment needs to be carefully monitored the electric thermostat and solenoid valve which will give greater accuracy and maximum fuel economy.

The Classic Gold is available as an LPG or Natural Gas heater. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator.

For the Propane model, several extras are available from the options section below: a regulator and hose set; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

As this model is made to order please allow approximately 14 working days for delivery.

• Dimensions: Height - 620mm, Width - 620mm, Depth - 320mm
  
• Heat Output: 5.6kW (4.7kW when flued)
  
• Heating up to: 180sq ft
  
• Frost Protection up to: 450sq ft
  
• Weight: 19kg
  
• Flue Diameter: 95mm
  
• Electric Thermostat & Solenoid Valve
  
• LPG or Natural Gas