The Frost Eater 1000 greenhouse heater is thermostatically controlled and will cut in when required to protect your plants against frost damage.

Designed for use in cold frames, lean- to and smaller greenhouses it can be floor or wall mounted. For safety the heating element is sheathed and all electrical connections are protected inside the enclosure at the end of the heater.

Heat Output 1000 watts
Voltage 220/240v/ AC50hz
Size 540mm x 120mm diameter
Area frost protection up to 80 sq ft
Complete with cable and plug

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Levant Fan is a compact circulating fan for Greenhouses and especially designed to deter Botrytis and other airborne fungal diseases.

Good circulation is very important in greenhouses. As well as reducing condensation, the air movement will improve heat distribution and reduce temperature gradients.

The main body is constructed from stainless steel for maximum durability with a sealed motor for continuous running and it is supplied complete with chains and S hooks for hanging from the greenhouse ridge.

Air Movement 400m/3hr (250cfm)
Voltage 220/240v/ AC50hz
Current - Fan 0.3 amps
Size 10inch x 8.5inch diameter (250 x 220mm)
Supplied with chain, S hooks 2 Metre cable and plug

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Proheater Deluxe 1500 is available for LPG or Natural Gas and with a 1.5KW output will heat an area of up to 55 sq ft and provide frost protection for an area of up to110sq ft.

This Deluxe Proheater is a tried and tested design. Introduced in 1979 it features a virtually indestructible thermostatically controlled valve, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition.

This model is available for use with Propane or Natural Gas. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator (see options below).

Options for the Propane model include a regulator and hose set; a gas low gauge that you can attach to your regulator to indicate when you need to replace the gas cylinder and an auto change over valve that will automatically change from one gas bottle to another (includes hoses, connections and full user instructions).

To select any of these options click in the relevant options box below.

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

Heat Output 1.5KW at 37mbar
Heating up to 55 sq ft
Frost protection up to110 sq ft
Thermostatic control
Piezo ignition
Flame failure device
CO2 sensor device
Floor standing
310mm x 130mm x 450mm
Made in UK
CE approved
1 year warranty
LPG or Natural Gas
Optional regulator with 1.2M gas tubing and 2 clips
Optional gas low gauge
Optional auto change over valve with hoses and connections

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Proheater Popular 3000 LPG greenhouse heater with a 3KW output will heat an area of up to 120 sq ft and provide frost protection for an area of up to 260sq ft.

The Proheater Popular 3000 is a floor standing convector model that uses bottled propane gas. It features thermostatic control, an adjustable heater output, flame failure device, CO2 sensor and Piezo ignition.

Options include a regulator and hose set for propane; a gas low gauge that you can attach to your regulator that will indicate when you need to replace the gas cylinder and an auto change over valve that will automatically change from one gas bottle to another (includes hoses, connections and full user instructions).

To select any of these options click in the relevant options box below.

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

Heat Output 3KW at 37mbar
Heating up to120sq ft
Frost protection up to 260 sq ft
Thermostatic control
Piezo ignition
Flame failure device
CO2 sensor device
Floor standing
Size 430mm x 150mm x 450mm
Made in UK
CE approved
1 year warranty
Optional regulator with 1 meter gas tubing
Optional gas low gauge
Optional auto change over valve with hoses and connections

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Levant Plus electric fan heater will improve circulation, control the temperature and protect against frost and cold weather. It has an output of 1.8KW linked to a thermostatic control which cuts the heat supply and allows the fan to continue to circulate the air, preventing airborne fungal disease.

The Levant Plus from Hotbox is a purpose designed greenhouse heater for smaller sized growers developed from the professional growing market. The 3 position switch enables it to be used as a fan only in the summer months.

The main body is constructed from stainless steel for maximum durability with a sealed motor for continuous running and it is supplied complete with chains and S hooks for hanging from the greenhouse ridge.

Heat Output 1.8 KW
Air Movement 400m3/hr (250cfm)
Voltage 220/240v/ AC50hz
Current - Fan 0.3 amps. Fan and heater 7.8 amps
Size 10inch x 8.5inch diameter (250 x 220mm)
Frost protection up to120 sq ft
Heating up to 60 sq ft
Supplied with chain, S hooks 2 Metre cable and plug

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Proheater Deluxe 3000 is available for LPG or Natural Gas and with a 3KW output will heat an area of up to 120 sq ft and provide frost protection for an area of up to 260sq ft.

This Deluxe Proheater is a tried and tested design. Introduced in 1979 it features a virtually indestructible thermostatically controlled valve, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition.

This model is available for use with Propane or Natural Gas. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator (see options below).

Options for the Propane model include a regulator and hose set; a gas low gauge that you can attach to your regulator to indicate when you need to replace the gas cylinder and an auto change over valve that will automatically change from one gas bottle to another (includes hoses, connections and full user instructions).

To select any of these options click in the relevant options box below.

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

Heat Output 3KW at 37mbar
Heating up to120sq ft
Frost protection up to 260 sq ft
Thermostatic control
Piezo ignition
Flame failure device
CO2 sensor device
Floor standing
430mm x 150mm x 450mm
Made in UK
CE approved
1 year warranty
LPG or Natural Gas
Optional regulator with 1 meter gas tubing
Optional gas low gauge
Optional auto change over valve with hoses and connections

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Elite fan heater will improve circulation, control the temperature and protect against frost and cold weather. It has an output of 2.8kW linked to a thermostatic control which cuts the heat supply and allows the fan to continue to circulate the air, preventing airborne fungal disease.

The Levant Plus from Hotbox is a purpose designed greenhouse heater for smaller sized growers developed from the professional growing market. The 3 position switch enables it to be used as a fan only in the summer months.

The main body is constructed from stainless steel for maximum durability with a sealed motor for continuous running. It is supplied complete with chains and S hooks for hanging from the greenhouse ridge together with handles and feet for bench or floor mounting.

Heat Output 2.8 KW
Air Movement 400m3/hr (250cfm)
Voltage 220/240v/ AC50hz
Current - Fan 0.3 amps. Fan and heater 12 amps
Size 16inch x 8.5inch diameter (410 x 220mm)
Frost protection up to180 sq ft
Heating up to 120 sq ft
Supplied with chain, S hooks 2 Metre cable and plug

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Shilton 1.5KW Greenhouse heater is available for LPG or Natural Gas and will heat an area of up to 60 sq ft and provide frost protection for an area of up to110sq ft.

The SHILTON is a most popular heater that has been trusted by gardeners for decades. This floor standing convector model has long lasting aluminium enclosed steel body powder coated in a smart red finish. It features thermostatic control, adjustable heater output, flame failure device and Piezo ignition.

This model is available for use with Propane or Natural Gas. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator (see options below).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

Options for the Propane model include a regulator and hose set; a gas low gauge that you can attach to your regulator to indicate when you need to replace the gas cylinder and an auto change over valve that will automatically change from one gas bottle to another (includes hoses, connections and full user instructions).

To select any of these options click in the relevant options box below.

Heat Output 1.5KW
Heating up to 55 sq ft
Frost protection up to110 sq ft
Thermostatic control
Piezo push button ignition
Flame failure device
Floor standing
360mm x 170mm x 540mm
Made in UK
CE approved
1 year warranty
Optional regulator with 1.2M gas tubing and 2 clips
Optional gas low gauge
Optional auto change over valve with hoses and connections

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The made to order CO2 Growth Gas Generator 2.5kW burns LPG or Natural Gas providing ideal growing conditions by controlling CO2 emissions.

Controlled by an electrical solenoid valve which can be operated by a time switch set to run a few minutes each hour, the Growth Gas Generator provides the correct levels of CO2. Known as the 'Threefold Enrichment' process, it is widely used by professional gardeners during the hours of daylight to speed up photosynthesis, enhancing plant development.

Depending on the size of your greenhouse the Growth Gas Generator should burn for about twelve minutes in each hour, burning about 0.25kg of propane in twelve hours. This should increase the amount of carbon dioxide in the air to 1000 parts per million, up from the 300ppm we breathe in as air.

With an output of 2.5kW the Growth Gas Generator will heat an area of up to 100sq ft and provide frost protection for an area up to 160sq ft.

The Growth Gas Generator is supplied with a fused 13amp plug. Not included is a thermostat control or electric timer which is required to control the amount of time the appliance is switched on and off. These items should be ordered separately.

For the Propane model, several extras are available from the options section below: a regulator and hose set; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

As this model is made to order please allow approximately 14 working days for delivery.

• Dimensions: Height - 540mm, Width - 360mm, Depth - 160mm
  
• Heat Output: 2.5kW
  
• Heating up to: 100sq ft
  
• Frost Protection up to: 160sq ft
  
• Weight: 7.5kg
  
• LPG only

Our Prices Include VAT
Plus Free Delivery within 14 Working Days (UK Mainland only)

The Shilton 3KW Greenhouse heater is available as an LPG or Natural Gas heater and will heat an area of up to 120 sq ft and provide frost protection for an area of up to 220sq ft.

The SHILTON is a most popular heater that has been trusted by gardeners for decades. This floor standing convector model has long lasting aluminium enclosed steel body powder coated in a smart red finish. It features thermostatic control, adjustable heater output, flame failure device and Piezo ignition.

This model is available for use with Propane or Natural Gas. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator (see options below).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

Options for the Propane model include a regulator and hose set; a gas low gauge that you can attach to your regulator to indicate when you need to replace the gas cylinder and an auto change over valve that will automatically change from one gas bottle to another (includes hoses, connections and full user instructions).

To select any of these options click in the relevant options box below.

Heat Output 3KW
Heating up to 120 sq ft
Frost protection up to 220 sq ft
Thermostatic control
Piezo push button ignition
Flame failure device
Floor standing
360mm x 170mm x 540mm
Made in UK
CE approved
1 year warranty
Optional regulator with 1.2M gas tubing and 2 clips
Optional gas low gauge
Optional auto change over valve with hoses and connections

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The made to order CO2 Growth Gas Generator 4kW burns LPG or Natural Gas, providing ideal growing conditions by controlling CO2 emissions.

Controlled by an electrical solenoid valve which can be operated by a time switch set to run a few minutes each hour, the Growth Gas Generator provides the correct levels of CO2. Known as the 'Threefold Enrichment' process, it is widely used by professional gardeners during the hours of daylight to speed up photosynthesis, enhancing plant development.

Depending on the size of your greenhouse the Growth Gas Generator should burn for about twelve minutes in each hour, burning about 0.25kg of propane in twelve hours. This should increase the amount of carbon dioxide in the air to 1000 parts per million, up from the 300ppm we breathe in as air.

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

With an output of 2.5kW the Growth Gas Generator will heat an area of up to 140sq ft and provide frost protection for an area up to 350sq ft.

The Growth Gas Generator is supplied with a fused 13amp plug. Not included is a thermostat control or electric timer which is required to control the amount of time the appliance is switched on and off. These items should be ordered separately.

For the Propane model, several extras are available from the options section below: a regulator and hose set; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions).

As this model is made to order please allow approximately 14 working days for delivery.

• Dimensions: Height - 540mm, Width - 360mm, Depth - 160mm
  
• Heat Output: 4kW
  
• Heating up to: 140sq ft
  
• Frost Protection up to: 350sq ft
  
• Weight: 7.5kg
  
• LPG only

Our Prices Include VAT
Plus Free Delivery within 14 Working Days (UK Mainland only)

The Regal 4 KW Greenhouse heater is available for LPG or Natural Gas and with an output of 4KW will heat an area of up to 140 sq ft and provide frost protection for an area of up to 350sq ft.

The Regal is manufactured in long lasting aluminium coated steel, with a stainless steel burner, affords the gardener the simplicity and reliability he expects and provides a generous heat output of 4kW for almost any size of amateur greenhouse.

There are two heaters in the Regal range - both have a heat output of 4kW and are thermostatically controlled, but they vary in their methods of control.

Regal Silver has a non-electric thermostat which turns the heater down to just a small pilot flame when desired temperature is achieved.

Regal Gold is operated by an electrical thermostat and an electrical solenoid valve which reduces output to just a small pilot flame as soon as the thermostat is satisfied. The electrical thermostat gives greater accuracy and consequently better control over fuel consumption. It needs an electrical supply and is made to order within approximately 14 working days.

Both of the Regal heaters are available for use with Propane or natural gas. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator (see options below).

Options for the Propane model include a regulator and hose set; a gas low gauge that you can attach to your regulator to indicate when you need to replace the gas cylinder and an auto change over valve that will automatically change from one gas bottle to another (includes hoses, connections and full user instructions).

To select any of these options click in the relevant options box below.

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

Heat Output 4KW
Heating up to 140 sq ft
Frost protection up to 350 sq ft
Thermostatic control
Piezo push button ignition
Flame failure device
Floor standing
360mm x 160mm x 540mm
Made in UK
CE approved
1 year warranty
Optional regulator with 1.2M gas tubing and 2 clips
Optional gas low gauge
Optional auto change over valve with hoses and connections

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The Proheater Deluxe 1200 is the latest and largest greenhouse heater, burning LPG or Natural Gas.

With a 12kW output the Deluxe 1200 will heat an area of up to 480sq ft and provide frost protection for an area of up to 1000sq ft.

Introduced in 1979, this tried and tested design features a virtually indestructible thermostatically controlled valve, adjustable heater output, flame failure device, CO2 sensor and Piezo ignition.

Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator (see options below).

For the Propane model, several extras are available from the options section below: a regulator and hose set; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

• Dimensions: Height - 540mm, Width - 660mm, Depth - 160mm
  
• Heat Output 12KW at 37mbar
  
• Heating up to 480sq ft
  
• Frost protection up to 1000sq ft
  
• Thermostatic control
  
• Piezo ignition
  
• Flame failure device
  
• CO2 sensor device
  
• Floor standing
  
• Made in UK
  
• CE approved
  
• 1 year warranty
  
• LPG or Natural Gas

Our price includes VAT
Plus Free delivery within 7 working days (UK Mainland only)

The made to order Classic Silver Flued 5.6kW Greenhouse Heater, with non electric thermostat, is ideal for growers of specialist and delicate plants.

The Classic Silver is supplied with one 90º bend and two straight lengths of vertical flue each 21" long, allowing the flue gases to be exhausted to the outside giving a clean atmosphere in the greenhouse.

With an output of 5.6kW (4.7kW when flued) the Classic Silver will heat an area up to 180sq ft and provide frost protection for an area up to 450sq ft.

Perfect for situations where the environment needs to be carefully controlled the non electric thermostat will turn down the pilot flame when the desired temperature is achieved.

The Classic Silver is available as an LPG or Natural Gas heater. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator.

For the Propane model, several extras are available from the options section below: a regulator and hose set; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

As this model is made to order please allow approximately 14 working days for delivery.

• Dimensions: Height - 620mm, Width - 620mm, Depth - 320mm
  
• Heat Output: 5.6kW (4.7kW when flued)
  
• Heating up to: 180sq ft
  
• Frost Protection up to: 450sq ft
  
• Weight: 19kg
  
• Flue Diameter: 95mm
  
• Non Electric Thermostat
  
• LPG or Natural Gas
  
• Made to Order
  

Our Price Includes VAT
Plus Free Delivery within 14 Working Days (UK Mainland only)

The made to order Classic Gold Flued 5.6kW Greenhouse Heater, with electric thermostat, is ideal for growers of specialist and delicate plants.

The Classic Gold is supplied with one 90º bend and two straight lengths of vertical flue each 21" long, allowing the flue gases to be exhausted to the outside giving a clean atmosphere in the greenhouse.

With an output of 5.6kW (4.7kW when flued) the Classic Gold will heat an area up to 180sq ft and provide frost protection for an area up to 450sq ft.

Perfect for situations where the environment needs to be carefully monitored the electric thermostat and solenoid valve which will give greater accuracy and maximum fuel economy.

The Classic Gold is available as an LPG or Natural Gas heater. Natural gas models should only be installed by a Corgi registered gas fitter and Propane models require a regulator.

For the Propane model, several extras are available from the options section below: a regulator and hose set; a gas low gauge, which when attached to a regulator will indicate when you need to replace the gas cylinder, and an auto changeover valve that will automatically switch from one gas cylinder to another (includes hoses, connections and full user instructions).

Gas powered greenhouse heaters should only be used in well ventilated areas to ensure the CO2 sensor is not set-off thus cutting out operation.

As this model is made to order please allow approximately 14 working days for delivery.

• Dimensions: Height - 620mm, Width - 620mm, Depth - 320mm
  
• Heat Output: 5.6kW (4.7kW when flued)
  
• Heating up to: 180sq ft
  
• Frost Protection up to: 450sq ft
  
• Weight: 19kg
  
• Flue Diameter: 95mm
  
• Electric Thermostat & Solenoid Valve
  
• LPG or Natural Gas

Our Price Includes VAT
Plus Free Delivery within 14 Working Days (UK Mainland only)